Install SBFSpot to read out SMA Sunny Boy data and make data available over MQTT for Home Assistant

I want to read out a SMA Sunny Boy data and make it available via MQTT to Home Assistant. Installation of SBFSpot on a Rasberry Pi is really easy. The tool to be used for this is SBFSpot. The SMA procotol used is proprietary and happens over 502/tcp.

1. Install command line:
   

   curl -s https://raw.githubusercontent.com/sbfspot/sbfspot-config/master/sbfspot-config | sudo bash

2. Follow the configuration tutorial and setup wizard
3. Edit the configuration file for MQTT:
   

   sudo vi cd /usr/local/bin/sbfspot.3/SBFspot.cfg

   to change the MQTT configuration and set the following MQTT_Data:
   

   MQTT_Data=Timestamp,SunRise,SunSet,InvSerial,InvName,InvSwVer,InvTime,InvStatus,InvTemperature,InvGridRelay,EToday,ETotal,PACTot,UDC1,UDC2,IDC1,IDC2,PDC1,PDC2,GridFreq

4. Test:
   

   /usr/local/bin/sbfspot.3/SBFspot -v -finq -nocsv -mqtt

5. Note the SMA inverter serial for adding to your Home Assistant configuration
   x
6. Configure Home Assistant and add these sensors to your configuration.yaml. Remember to replace the SERIAL with the actual serial number from your inverter.
   
   
7.